Tips: How to Resolve Blue Screen Error INVALID_MDL_RANGE in Windows 10

How to Resolve Blue Screen Error INVALID_MDL_RANGE in Windows 10. As you notice the title of this article, yes, when INVALID_MDL_RANGE appears on your screen, means it is also a type of blue screen error in windows 10. The element behind this error may be outdated device drivers, missing system elements, DLL files, infection from virus products, using similar programs at the same time, leaving update patches pending and so on. In this topic we will discuss about its workarounds and try to fix it.

How to Fix Blue Screen Error INVALID_MDL_RANGE in Windows 10

The following tips will be helpful to get rid of Blue Screen error INVALID_MDL_RANGE in windows 10: –

1. Un-check Automatically Restart
2. Boot the Windows in Safe Mode
3. By Using Troubleshooter
4. Clean junk files 
5. Update Driver by using Device Manager
6. Complete system Scan
7. Run the System File Checker by Command Prompt
8. Check any Memory related issue
9. Remove all External Hardware items as one time measure
10. Uninstall Duplicate Programs installed in System
11. Apply DISM Tools
12. By System Restore
13. Uninstall Update files
14. Complete Disk Checking in Hard Disk Drive 
15. Uninstall Third Party Anti-Malware program

Un-check Automatically Restart 

Step-1: Press Windows and D keys conjointly to open Desktop.

Step-2: Make a right-click on “This PC” icon and select Properties option.

Step-3: System window will appear, choose “Advanced system settings”.

Step-4: Now proceed to the Advanced tab from the popup wizard.

Step-5: Proceed to the Startup and Recovery page.

Step-6: Click on Settings button.

Step-7: Come down to system failure section in this page and remove the tick mark from the box “Automatically restart“.

Step-8: Click on the Ok button.

This action will disable Automatic Re-starting of Windows and you are free to more work on computer without the error INVALID_MDL_RANGE in Windows 10.

Boot the Windows in Safe Mode

Booting in Safe mode is another method to solve critical issue inside like INVALID_MDL_RANGE BSOD Error. Try to follow the following steps: –

• Right click on Start menu.
• Select on Run Menu.
• Type msconfig in the search box.
• Proceed to Boot tab and click on Boot options segment.
• Check the box before Safe Boot and activate all the options below.

• Press first Apply then Ok to save these changes.
• Leave the wizard and Restart Windows 10 PC.
• When the device starts after completing the first cycle of restarting, keep pressing the F8 key at a stretch.
• When reached to the consequent page, select Safe Mode and enter into this mode afterward.

By Using Troubleshooter

Windows in-built help option Troubleshooter may be helpful to fix Blue screen of Death (BSOD) error in windows 10. You should follow the following steps: –

Step-1: Open setting app by Pressing Win+I hotkey together.

Step-2: Click on the Update & Security tile.

Step-3: In the next page, choose Troubleshoot option from left pane and also further proceed to the adjacent right.

Step-4: Select Blue Screen from here and when expanded, choose Run the Troubleshooter option from the extended pane.

The process will automatically resolve BSOD error present in the system and you can work comfortably.

Clean junk files 

Temporary, useless, unnecessary Windows update files having junks and fill disk storage. As a result, INVALID MDL RANGE BSOD errors occur. You should clean junk files using the “Disk Cleanup” utility: –

• Type cleanmgr in search box.
• Choose the drive where you want to carry out the cleaning.
• Choose C: and press the Enter key.
• Disk Cleanup Utility will first make a calculation about how much space it can retrieve out of the drive and then show the wizard.
• Move little down in the wizard and make a click on Clean up system file option.

• Select all the check boxes under “Files to delete” area without Downloads.
• Hit the Ok button from the tail end and start the cleaning process.

Note- Before applying this action, make sure there is nothing important in the Recycle Bin. If any, restore in the respective location.

Update Driver to Fix Blue Screen Error

Whenever there is an INVALID MDL RANGE error detected, You may resolved this issue by updating drivers using Device Manager. Obsolete device drivers is one of the cause of this type of error.   You should update your drivers by using Device Manager. Follow the under mentioned steps: –

Step#-1: Open Taskbar Search by pressing the Win+S keys.

Step#-2: Device manager will appear after typing it in the search box.

Step#-3: In the new appearing window, look for exclamation mark in the console besides devices.

Step#-4: As soon as it found, expand it by selecting and also make a right click on Yellow indication.

Step#-5: Choose the Update driver option from list and Follow the on screen details.

Step#-6: You should Reboot the windows to make the changes effective.

Step#-7: Once sign back again, check for the occurrence of the error.

When the device drivers are finally u to date, there should not be any INVALID_MDL_RANGE BSOD Error hopefully.

Complete system Scan

Virus affects your system and a result many issues such as BSOD error will occur. So a complete system scan becomes necessary for any users. Make this by the following steps: –

• Open Windows Security from typing in the search box.
• Click on Virus & threat protection from the left pane and move sideward right.
• On this side, click the link with title Scan options.
• Select the radio button before Full scan and also choose the Scan now option from down.
• If it detects some viruses, make a click on the Clean threats option and remove them from the system.
• To know more about the malware, press the See threat details link.
• Moving ahead to the following page, there will be three options available for you.
• Choose the Remove button and hit the Start actions option eventually.

This will remove all the vulnerable malware present in the system and thus you will be safe from INVALID_MDL_RANGE BSOD Error in Windows 10.

Run the System File Checker by Command Prompt

Any of your system files may be corrupted and it may be a cause of Blue screen of Death (BSOD) error in windows 10. So you should apply the system file checker by using Command Prompt.  Follow the following steps to use this tips: –

• Press the Win+S keys together,  the Taskbar search will appear.
• Type cmd.exe in the empty search field and when Command Prompt appears in the Best match, make a right click on it.
• Choose the Run as Administrator option and once UAC prompts for permission, select Yes.
• As soon as the elevated Command Prompt appears in a separate window, type sfc /scannow and press Enter key.
• The system will start detecting the corrupted files in the system and fix automatically. This might take a few minutes. Wait till process complete.
• Reboot the Device and once sign back and check for the occurrence of the error.

Now there will be no INVALID_MDL_RANGE BSOD Error in your system.

Check any Memory related issue to Fix Blue Screen Error

INVALID_MDL_RANGE Blue screen of Death (BSOD) error in windows 10 may occurs due to memory issues. RAM can also raise this type of error. you can go through the Memory Diagnostic Tool to fix this issue. Here is how to open memory diagnostic tools in windows 10: –

• Before starting this process, save all the running programs and close them as well.
• In the Taskbar Search, type Windows Memory.
• Click on Memory Diagnostic Tool.
• Now choose Restart now and check for problems (recommended) option.
• After the scanning initiates, you will see a Blue screen detecting memory issues. The Device will Restart automatically once it reaches 100%.
• You can see the results in the Notification area of Taskbar once sign back again.

Remove all External Hardware items as one time measure

Many external hardware will be attached with your system and this may be a reason for this BSOD error. You should remove all as one time measure.

• Unplug all the accessories.
• Press the Windows key and then hit Power icon followed by selecting the Restart option.
• Start again and Plug all the devices you have disconnected.
• Install the latest driver to the PC and work normally.

Uninstall Duplicate Programs installed in System

Sometimes one or more application of same category were installed in your system. You should uninstall all those duplicate applications to get rid of  INVALID_MDL_RANGE BSOD Error in windows 10. Follow the below steps to uninstall an app-

• Press Win+R hotkeys conjointly to open the Run dialog box.
• Type appwiz.cpl and click on the OK button.
• Search the duplicate applications from Displaying Programs and Features which causing INVALID_MDL_RANGE BSOD Error.
• Uninstall it.
• Follow the on-screen guidelines shown afterward to accomplish this task.
• Re-boot your system and check for the trace of error in the system.

Apply DISM Tools to resolve Blue Screen Error

Whenever your system image files get infected or corrupted due to various reasons, then chances became high to create INVALID_MDL_RANGE BSOD Error. In this case, apply “DISM” utility tools located in Elevated Command Prompt. Follow the following instruction: –

• Open Command Prompt.
• Type the following command at the place where the cursor is blinking-
  • DISM.exe /Online /Cleanup-image /Restorehealth
• Press the Enter key and wait till finish the process.
• Upon detecting all the defective windows image files, it will fix those automatically.
• Perform a fresh reboot to windows.

By System Restore

If you make any changes in your system by installing or uninstalling any application, then correspondingly another changes may happen automatically in your system. And this may be a cause of INVALID_MDL_RANGE BSOD Error. To get rid of this situation, you should go back to previous setting of your system i.e system restore.

• Open Run dialog box.
• Type rstrui in the text field and select Ok.
• Once the System Restore wizard appears, choose the Next option to unfold PC’s Restore points.
• Check on Show more restore points.
• Select the last restore point and hit the Next button to proceed.
• From the following window, choose the Finish option to initiate.

Uninstall Update files to resolve INVALID_MDL_RANGE Blue Screen Error

Sometimes, you try to update windows and process become interrupted due to any reason in mid of process. In this case, you should uninstall this half updated files saved in your update history. This may be a reason of BSOD error in windows 10. Follow the following steps: –

• Press the Windows and I keys conjointly to open setting app.
• Make a click on Update & Security and load its additional settings page.
• Now select Windows Update from the left pane.
• Perform a click on View update history option.
• Here, make a click on Uninstall updates and let Control Panel show up a new window.

• Make a right click on displaying option and choose Uninstall from there and follow the next move according to guidelines shown in desktop.

Complete Disk Checking in Hard Disk Drive to Fix Blue Screen Error

Your system Hard Disk Drive may be a reason for INVALID_MDL_RANGE BSOD Error. You should try Disk Checking Utility to perform this action. Adopt the following steps to complete disk checking in HDD: –

• Make a right-click on empty space of your desktop and select Task Manager from displaying menu.
• Perform a click on File located at the top left corner and choose “Run new task” option from the dialog box.
• Type cmd into the Run dialog box
• Put a tick mark on the box before “Create this task with administrative privileges”
• Press enter key and get a pass to the Elevated Command Prompt directly.
• Here type the following command at the winking cursor –chkdsk
• When you press Enter key, the Disk Checking utility will start showing the disk status only. To detect and fix all other issues in it, arrange the command as follows-

chkdsk C: /f /r /x

In the above command line, the character we have added represents-

C:- Disk Drive where you have installed the Windows. Use D:, E: or any in case of using them for storing OS.

f- fixes the issues detected by the utility in the volume.

r- detects the abnormalities occurred in the Disk volume.

x- help in the detection process by splitting up the volume.

• After the task is finished, restart the windows at once.
• When getting back to operation, perform a check for the existence of error in the system.

Uninstall Third Party Anti-Malware program 

Third party anti malware programs may be not safe for your computer, You should uninstall them by the following steps –

• Open the Windows Settings.
• Go to the Apps area and make a click on it.
• On the next page, select Apps & features from the left pane.
• At the same right adjacent side, a list of Applications being loaded, Select the Anti-virus programs from the list and press the Uninstall button when appear.
• If UAC floats up asking permission, provide consent by clicking on Yes.
• Follow the guidelines and action appearing on screen to remove it from the device.

Before starting to do the clean installation, make sure you have saved all the necessary files in the backup document. We recommend saving these in an external drive preferable in USB storage. Don’t try unless being competent, better to ask help from professionals.

That’s all!!